hapfo-WOOD COPYING LATHE
ap-5 0 0 0-M motor 220 volts, 3-phase, 60 cycles
|
|
Wood copying lathe with manual
feed (without follower rests)
incl. 1 HSS-steel (distance between centres 1300 mm, copying length 1150 mm)
|
|
| Extra charge for distance
between centres 1600 mm, copying length 1150 mm |
• |
| Extra charge for distance
between centres 1600 mm, copying length 1400 mm |
• |
| Extra charge for tool-panel
|
• |
Hapfo - Hydraulic Wood Copying
Lathe AP-5 0 0 0-Hydro
Distance between centres 1600mm, copying length 1500 mm,
Spindle motor 2,5 HP
Hydraulic tracing device (stroke 150 mm)
Motorized feed by means of infinitely variable electronic direct-current
motor
(0,37 kW) inclusive return speed of carriage
incl. 1 HSS - steel, however without follower rests
Other technical data and accessories - see
ap-5000-M
|
|
| Extra charge for no-wear,
hardened linear slide bar for copy slide rest and copying saddle, incl.
heavy tailstock MK 3 |
|
Extra charge for second
hydraulic copy slide rest (double copying lathe)
incl. heavy tailstock MK3, incl. 1 HSS-steel
Distance between centres 1.400 mm, copying length 1.390 mm
|
• |
| Special-Live centre MK 3, with
pressure ring-only for linear slide bar or double- copying lathe |
|
| Six-pronged dog MK 3, Ø 20 mm -
X-large-only for double-carriage copying lathe |
|
| Six-pronged dog MK 3, Ø 30 mm -
X-large-only for double-carriage copying lathe |
|
| Extra charge for precision
setting of depth |
• |
| Extra charge for electronically
smooth starting device |
|
Extra charge for spindle drive
infinitely electronically variable
from 0 -3500 rpm, motor: 220 volts (3 phase) - 2 HP (1,5 kW) - 60 cycles
|
• |
| Extra charge for motor brake
incl. brake switch and slip-off safety ring |
• |
| Extra charge for left and right
run incl. slip-off safety device |
• |
Slip-off safety device per
accessory part on/in spindle, required for motor brake and left and right
run
|
|
| Extra charge for motorized feed
by means of infinitely variable electronic direct-current motor incl. return
speed of carriage (0,37 kW) |
• |
| Four-jaw chuck follower rest, 30
- 60 mm infinitely variable |
• |
| Four-jaw chuck follower rest, 50
- 80 mm infinitely variable |
• |
| Four-jaw chuck follower rest, 60
-100 mm infinitely variable (max. 1250 rpm) |
• |
| Four-jaw chuck follower rest,
100 - 135 mm infinitely variable (max. 1000 rpm) |
• |
| Ring-follower rest (15-70 mm)
with HSS-steel for rough cutting (without inset disc) |
• |
| 1 Set inset discs for ring
follower rest Ø 20 / 30 / 40 / 50 / 60 / 70 mm |
|
| 1 Set inset discs for ring
follower rest Ø 15 / 25 / 35 / 45 / 55 / 65 mm |
|
| Work piece feeding device
(mounted on ring-follower rest) |
|
| Ring-follower rest (80-120 mm)
with HSS-steel for rough cutting (without inset disc) |
• |
| 1 Set inset discs for ring
follower rest, Ø 80 / 85 / 90 / 95 / 100 mm |
|
| Original-sample tracing device
(tracing up to 1050 mm) = standard equipment on Hydro - version |
|
| Special-live centre MK 2 with
pressure ring |
|
| Six-pronged dog MK 3 Ø 20 mm
lengthened |
|
| Six-pronged dog MK 3 Ø 30 mm
lengthened |
|
| Six-pronged dog MK 3 Ø 40 mm
lengthened |
|
| Hand rest for subsequent cutting
by hand (on support) |
|
| Hand rest for subsequent cutting
by hand (on support) for Hydro |
|
| Copying lathe tool HSS |
|
| Super-copying lathe tool for
soft and hard wood (lifex 10) |
|
| Hand rest base with hand rest
275 mm (for turning by hand) |
|
| Hand rest 180 mm |
|
| Hand rest 425 mm |
|
| Template made of aluminium 60 x
1000 mm |
|
| Template made of aluminium 80 x
1000 mm |
|
| Template made of aluminium 100 x
1000 mm |
|
| Template made of aluminium 60 x
1500 mm |
|
| Template made of aluminium 80 x
1500 mm |
|
| Template made of aluminium 100 x
1500 mm |
|
| Centering device |
|
| Socket chuck Ø 40 / 50 / 60 mm |
|
| Socket chuck Ø 70 / 80 mm |
|
| Screw chuck Ø 90 mm |
|
| Face plate Ø 150 mm |
|
| Gear rim drill chuck MK 2 |
|
| Three-jaw chuck Ø 125 mm
|
|
| Four-jaw chuck Ø 125 mm |
|
| Compound slide rest (NEW - also
suited for pattern shops) |
|
| Cross-copying device incl.
safety and suction hood |
|
Special-lathe tool incl. steel
holder and profile sharpening machine with diamond grinding stone (motor 220
volts, 60 cycles)
|
|
| Special-Lathe tool (V-Steel) |
|
| Tantum-Lathe tool (V-Steel) |
|
| Sharpening machine for copying
lathe tools (motor 220 volts, 60 cycles) |
|
| Replacement grinding stone for
sharpening machine |
|
| Subsequent cutting device with 2
supports (without steel) |
• |
| Steel for subsequent cutting
device (for mortise) |
|
| Connection unit for suction tube
for ring-follower rest (15 - 70 mm) |
|
| Connection unit for suction tube
for ring-follower rest (80 - 120 mm) |
|
| Suction connecting piece for
copying lathe tools (= standard equipment on Hydro version) |
|
| Twist Attachment KFE - 5000
complete for ap5000 motorised and Hydro |
• |
| Profile cutter knives, complete
set of 6 pcs., incl. 2 collet chucks and cutter adapter |
