THE MODEL TA  FULLY AUTOMATIC COPY LATHE WITH HOPPER

Centauro
TAEC-Winner

TA/EC-WINNER with fully automact only with hopper.
AUTOMATIC COPY LATHES WITH ELECTRONIC CONTROL FOR TURNING,
 

DOWNLOAD DEMO VIDEO CLICK HERE MPEG FORMAT MUST HAVE HIGHSPEED INTERNET

MAIN FEATURES The TA/EC WINNER lathe is the result of extensive experience acquired by Centauro in the “wood-turning industry” and incorporates a number of innovative technical features. The machine is of a very strong and sturdy design, and all models are fitted with a high precision ballscrew for the movement and control of the tool carriage.This ensures a consistent, high quality turned component. Users will appreciate the new, easy to use and precise hydraulically-controlled automatic workpiece centering system and the fact this is totally adjustment free.After the turning cycle is completed, the piece is automatically ejected.This device is suitable for square sections upto 100 mm and is specifically designed to speed up workpiece loading, thereby increasing ouput. For square section components over 100 mm upto 178 mm, the unit features 2 special “V” supports with fine adjustment. The cutting system incorporates 2 independent Tantung gouges (radius 3,5 mm and 0,6 mm) mounted on sensitive Duplomatic hydraulic copiers that follow either a sample or template. A third 3,5 mm radius gouge can be used for the pre-rounding of large size components. Another important feature is the use of heavy duty hardened steel interchangeable carriage slideways. These ensure maximum precision of the tool carriage longitudinal movement at speeds upto 30 mt/min. All machine controls are located on a swinging arm panel which can be adjusted for greater operator comfort. The TA/EC WINNER features an automatic workpiece loader for non-stop production cycles, automatic programming and storage of the various tool carriage working speeds as well as programming of the hydraulically controlled tenon/dowel-knife carriages (option). And all these features are controlled via the EM-19 or EM-22 electronic unit with visual display screen. STANDARD EQUIPMENT - 1 Large revolving steady with pre-cutting tool - 1 Small revolving steady - 2 Reducing bushes - 3 V-shaped Tantung gouges - 2 Ball bearing tailstock centres - 3 Drive centres with automatic centering cups - 2 Special V supports for the automatic workpiece centering with square section over 100 mm upto 178 mm - Automatic hopper feed - Electronic unit EM19 (for TA/EC-1600/2000) or EM22 (for TA/EC-3000) which controls the automatic hopper feed, the programming and storage of the various tool carriage working speeds and the automatic programming of the hydraulically controlled tenon/dowel knife carriages (tenon/dowel knife carriages = option) for non-stop production cycles. - Grease pump for re-circulating ball and screw drive - Maintenance tools   OPTIONS - Programmable hydraulic tenon/dowel knife carriages (dust extraction outlet Ø 100 mm) - 10 HP spindle motor with variable and programmable speed 0-4500 R.P.M. combined with EM22 electronic control. For TAEC-1600 and TAEC-2000 only.   TECHNICAL DATA   TA/EC 1600 TA/EC 2000 TA/EC 3000 Max. distance between centres mm 1600 2000 3000 Max copying Ø mm Ø250 (178) Ø250 (178) Ø250 (178) Max Ø permitted by small steady mm Ø90 (65) Ø90 (65) Ø90 (65) Max Ø permitted by large steady mm Ø140 (100) Ø140 (100) Ø140 (100) Diameter of tailstock sleeve mm 60 60 60 Sleeve travel mm 100 100 100 Morse taper for driving and tailstock centre   3/4 3/4 3/4 Programmable saddle feed speed mt/min 0 - 30 0 - 30 0 - 30 Saddle return speed mt/min 30 30 30 Spindle speed g/min RPM 600 - 900 - 1200 - 1500 - 1800 - 2250 - 3000 - 4500 - Variable and programmable spindle speed g/min RPM - - 0 ÷ 4500 Spindle motor power Kw 4,5 - 5,7 4,5 - 5,7 7,5 Electronic unit, standard fitted   EM19 EM19 EM22 Spindle brake   Idraulico Motor power of hydraulic unit Kw 1,1 1,1 1,1 Installed power Kw 8,7 8,7 10 Operating pressure bar 20 20 20 Compressed air pressure for hopper feed bar 6 6 6 Stroke of copying unit mm 150 150 150 Max. depth of 2nd pass mm 30 30 30 Dust extraction outlets mm 2 Ø 100 2 Ø 100 2 Ø 100 Required capacity for extraction system m3/h 1200 1200 1200 Air speed mt/sec 20 20 20 Noise level at operator position db (A) 81 81 81 Net weight Kg. 1960 2150 2380 Gross weight (crate) Kg. 2110 2350 2650 Gross weight (case) Kg. 2220 2420 2780 Packing sizes mm 3700x1380x1870 4100x1380x1870 5100x1380x1870

Detail Detail of the 2 high-sensitivity hydraulic tracer points for copying from wood sample or metal template. Detail of the 2”V” gouges fitted to independent hydraulic copying units. The third gouge can be used for pre-rounding. Hydraulically-controlled tenon/dowel-knife carriage (option) for finishing or 90° cuts.   Overall dimensions

 Download PClick PDF Icon to download brochure 

BUY TOOLING FOR THIS LATHE Tooling Vitical COPYLATHE CUTTERS

---

Information Request Form

Select the items that apply, and then let us know how to contact you.

Send product literature
Send Machine Quote
Have a salesperson contact me

"Quotation on What Machine Model? "
"Your name"
"Your Title"
"Your Company"
"Your Address"
"Your Meassage to us"
"Your email address "
"Your FAX"
"Your Phone"
To have your form sent & have a confirmation on your request, please enter the characters you see in the image:
	Why?
If you cannot read the image, click for a new one  New image