|
|
| (802)476-8354 |
|
|
MODEL FC1600 With Milling head SEMI-AUTO WOOD COPY LATHE
MICROMEDIA FLASH PLAYER 7 FORMAT
Spirals, Twists and Flutes
G&M DISTRIBUTORS is proud to introduce the newest lathe to the Centauro line. The Centauro FC1600 copy lathe is equipped with an integrated milling head able to produce fluted and spiral twist pieces. The FC1600 frame construction is based upon the original quality of the T4 copy lathe. The new integrated milling head can be activated by a switch after turning as been completed .The new FC Lathe is a combined unit able to perform two machining operations in a very simple way: the longitudinal turning of wood components and the cutting of ornamental
DOWNLOAD BROCHURE
MAIN FEATURES:
·
Press button manual electric controls
·
Hydraulic
copying unit with highly sensitive tracer working on both wooden
samples or templates,for copying.
·
High Precision Ball Screw Advance for Accurate Saddle Feed Speed
Programming.
·
Capable of two working passes, roughing first and then
finishing
·
Semi-automatic mechanical workpiece centering
device
·
Electric spindle brake
·
Turning with a single cobalt gouge, radius 1.2
mm
·
Spindle reversing to change from copying to manual working and vice versa
or for manual sanding.
· Milling cutter head with driving centre ø 30mm and ball bearing tailstock centre
STANDARD EQUIPMENT
• Motor protection switch and
emergency push-button
TECHNICAL SPECIFICATIONS:
Maximum
distance between centers
63"(1600mm)
Height of
centers over bed
9.84"
Maximum
milling diameter
7.87”
(200mm)
Minimum
milling diameter
0.27” ( 7mm)
Swing over
bed (manual turning)
19.68"
(square 13.7”x13.7")
Swing over
bed with copy unit
5.9" (square
4"x 4”)
Swing
permitted by revolving steady
3.5”
Swing
permitted by fixed steady
3.9”
Connection
for driving & tailstock center
c-3
Saddle feed
speed
0 to 19.8
ft/min
Saddle
return speed
24 ft/min
Spindle
speed RPM
600-900-1100-1300-1500-1800-2200-3000
No. 10
pitches
0.59” –
12.6”
Indexing
2 to 24
2 speed
milling motor
0,6 – 1 HP
Milling
speed RPM
6500 – 13000
Spindle
motor power
4 HP
Motor power
of hydraulic unit
1 HP
Installed
power
5 HP
Operating
pressure
362 psi
Stroke of
copy unit
3.14”
Finishing
pass max depth
1”
• Revolving steady Ø 90 mm (max. 65x65 mm.) with reducing bush and
pre-cutting insert knife
• Ball bearing tailstock centre Ø 12 mm.
• Driving centre for copying Ø 28 mm.
• Indexer disc with drive centre for milling, Ø 28 mm.
• One cobalt gouge, radius 1,2 mm.
• Tool support bracket 300 mm for hand turning
• Saw dust hood Ø 100 mm.
|