|
|
|
(802)476-8354 |
|
|
fits all hapfo and most lathes with #4MT
CLICK HERE TO DOWNLOAD PDF BROUCHURE
hapfo ap-5000-Hydro King
MICROMEDIA FLASH PLAYER 7 FORMAT
The Hapfo ap-5000-Hydro King expands the capabilities of the hapfo
ap-5000-Hydro by giving the woodturner the ability to turn and rope items
up to 96" such as bed posts and columns. The King's innovative hydraulic
tracing device has a six inch range that allows the woodturner to produce
exquisite profile pitches and it is capable of copying from a sample as
well as a template. The KFE Twist Attachment, can be fitted on the
ap-5000-Hydro King to create endless turning possibilities such as
longitudinal groovings, rope twists, barley twists, spirals, and hollow
core turnings.
| hapfo – Hydraulic Wood Copying
Lathe ap-5 0 0 0-Hydro King Motor 220 volts, 3-phase, 60 cycles |
|
| Distance between centres 1.600 mm, copying
length 1.500 mm Hydraulic tracing device (stroke 150 mm) Motorized feed by means of infinitely variable electronic direct-current motor (0,37 kW) incl. quick return of carriage, tailstock MK 2 incl. 1 HSS - steel, however without follower rests |
|
| Extra charge for distance between centres
2.500 mm, copying length 2.400 mm, inclusive second lathe bed with third
column as well as second tool panel, incl. template bar holder on 2nd
bed with throughway template bar as well as two cranks for fine
adjustment and two additional supporting legs to the bed, incl. gear
rack and aluminium strip on 2nd bed, incl. heavy tailstock MK 3. A max. work piece Ø of 170 mm is possible when using the whole distance between centres of 2.500 mm. (Total length of machine about 3.600 mm. Machine will be supplied in one whole piece as it cannot be dismantled) |
• |
| Extra charge for spindle drive infinitely
electronically variable From 0-3500 rpm, motor: 220 volts, (3 phase) – 2 HP (1,5 kW) – 60 cycles |
• |
| Extra charge for special setup for grooving
(KF-50) incl. feed motor (0,75 kW) with separate ventilation incl. KFE, however without ELU-router, without bracket, incl. 16 mm collet. Grooving length 2.400 mm |
• |
| Profile cutter knive No. 1 for KF-50 | |
| Profile cutter knive No. 2 for KF-50 | |
| Profile cutter knive No. 3 for KF-50 | |
| Profile cutter knive No. 4 for KF-50 | |
| Profile cutter knive No. 5 for KF-50 | |
| Profile cutter knive No. 6 for KF-50 | |
| Profile cutter knive No. 7 for KF-50 | |
| Special-live centre MK 2 with pressure ring | |
| Special-live centre MK 3 with pressure ring | |
| Extra charge for precision setting of depth | • |
| Extra charge for left- and right run incl. slip-off safety device | • |
| Slip-off safety slot per accessory part on/in
spindle) required for left- and right run |
|
| Four-jaw chuck follower rest 30 - 60 mm infinitely variable | • |
| Four-jaw chuck follower rest 50 - 80 mm infinitely variable | • |
| Four-jaw chuck follower rest 60 - 100 mm infinitely variable (max 1250 rpm) | • |
| Four-jaw chuck follower rest 100 - 135 mm infinitely variable (max 1000rpm) | • |
| Ring-follower rest 15-70 mm with HSS-steel for rough cutting (without inset discs) | • |
| 1 Set inset discs for ring follower rest Ø 20 / 30 / 40 / 50 / 60 / 70 mm | |
| 1 Set inset discs for ring follower rest Ø 15 / 25 / 35 / 45 / 55 / 65 mm | |
| Work piece feeding device (mounted on ring-follower rest) | |
| Ring-follower rest 80 - 120 mm with HSS-steel for rough cutting (without inset discs) | • |
| 1 Set inset discs for ring follower rest Ø 80 / 85 / 90 / 95 / 100 mm | |
| Six-pronged dog MK 3, Ø 20 mm lengthened | |
| Six-pronged dog MK 3, Ø 30 mm lengthened | |
| Six-pronged dog MK 3, Ø 40 mm lengthened | |
| Hand rest for subsequent cutting by hand (on support) for Hydro | |
| Copying lathe tool HSS | |
| Super-copying lathe tool for soft and hard wood (lifex 10) | |
| Hand rest base with hand rest 275 mm (for turning by hand) | |
| Hand rest 180 mm | |
| Hand rest 425 mm | |
| Template made of aluminium 60 x 1000 mm | |
| Template made of aluminium 80 x 1000 mm | |
| Template made of aluminium 100 x 1000 mm | |
| Template made of aluminium 60 x 1500 mm | |
| Template made of aluminium 80 x 1500 mm | |
| Template made of aluminium 100 x 1500 mm | |
| Centering device | |
| Socket chuck Ø 40 / 50 / 60 mm each | |
| Socket chuck Ø 70 / 80 mm each | |
| Screw chuck Ø 90 mm | |
| Face plate Ø 150 mm | |
| Gear rim drill chuck MK 2 | |
| Three-jaw chuck Ø 125 mm | |
| Four-jaw chuck Ø 125 mm | |
| Compound slide rest ( NEW - also suited for pattern shops) | |
| Cross-copying device complete, incl. safety and suction hood | |
| Special-lathe tool incl. steel holder and
profile sharpening machine with diamond grinding stone (motor 220 volts, 60 cycles) |
|
| Special-Lathe tool (V-steel) | |
| Tantum-Lathe tool (V-steel) | |
| Sharpening machine for copying lathe tools, (motor 220 volts, 60 cycles) | |
| Replacement grinding stone for sharpening machine | |
| Connection unit for suction tube for ring-follower rest 15 - 70 mm | |
| Connection unit for suction tube for ring-follower rest 80 - 120 mm |
Drive centers with spurs #4MT SPECS Total length 11'' dia. of sur 11/2''SEE BELOW:click on pitcher to enlargs
I tem Name:#4MT DRIVE CENTER W/SPUR last updated :9/25/2009
Item Number: 4mt-drct
Price: $665.41
Buy a set of two and get free ups overnight shipping.save $85.00 Item Name:#4MT DRIVE CENTER W/SPUR last updated :9/25/2009
Item Number: 4mt-drct
I tem Name:#4MT DRIVE CENTER W/SPUR
set of two
Price: $1330.82
|