t90-lathe-pic.JPG - 21673 Bytes

 Machine Demo Videos Click Here


CENTAURO T90 CNC LATHE

The T90 is a state of the art CNC lathe.  Using floppy disk storage, the need for a timber original or a metal template of the component (stair posts, chair or table legs, etc.) is eliminated.

The graphic creation and storage of the profile can be produced very quickly directly on the control panel of the machine or on any desktop PC, thanks to Centauro’s dedicated software.  Commercially available CAD software may also be used, giving the buyer three ways in which to produce the graphic image.

The control computer also stores the optimum cutting data, i.e. saddle speeds, the number of passes needed as well as the position of any dowels.         

Since the T90 may be re-set between different components in an extremely short time, many different turnings can be produced in one working shift.  This unique ability to produce short batches of many different designs reduces stocking costs for "work in progress" substantially.

An automatic hopper automatically loads timber blanks, allowing unattended operation.  

 t90-comput-pic.JPG - 4973 Bytes                                                                                t90-auto-center-drive.JPG - 3951 Bytes

                 Office PC for programming                                                                 
  
Auto centering drive centers.


STANDARD EQUIPMENT:

·  1 revolving steady, dia. 140 mm                                                     t90-revolving-steady.JPG - 6417 Bytes

·  1 revolving steady, dia. 90 mm

·  2 reducing bushes (blanks)

·  1 dowel cutting knife (25 mm width)

·  2 V-shaped cobalt gouges (radius 0.6 mm and 3.5 mm)

·  2 ball bearing tailstock centers (dia. 12 and 48 mm)

·  3 drive centers w/centering cup (dia. 18-26-48 mm)

·  Grease pump for re-circulating ball and screw drive

·  Maintenance tools

TECHNICAL DATA:

Distance between centers

63"

Max. dia. over copy saddle

9.8" (7" x 7" square)

Height of centers over bed

9"    

Square permitted by 90 mm dia. Steady

3.54" x 3.54"

Square permitted by 140 mm dia. Steady

5.51” x 5.51''

Tailstock and headstock center

MK/MT 3

Spindle speed RPM

900-1500-1800-2250-3000-4500

Saddle feed speed

variable computer controlled 0-394”/min   

Saddle return speed

394”/min

Spindle brake

hydraulically controlled

Spindle motor power

6.5-7.5 HP

Hydraulic motor power

0.5 HP

Installed power

10.7 HP

Compressed air pressure (for hopper feed only)

6 bar

Dust extraction outlets

N. 2 dia. 3.9” 

Required capacity for extraction system

1200 m3/h

Air speed

20 mt/sec.

Net weight without hopper feed

3,850 lbs

Gross weight (crate) without hopper feed

4,510 lbs

Net weight with hopper feed

4,180 lbs

Gross weight (crate) with hopper feed

4,730 lbs

Noise level at operation position

81 db (A)

                                                                                               

Automatic indexing tool turret t90-index.JPG - 7556 Bytes

for up to 5 automatic operations.

  

centering with square section over 100 mm up to 178 mm maximum.

AVAILABLE OPTIONS:

·        Bushes for revolving steady (specify dia.).                                       

·        Cobalt gouge (radius 0.6/1.25/3.5 mm)each                                      

·        Tantung gouge (radius 0.6/1.25/3.5 mm)each                                    

·        Backnife for dowels and 90ø cuts                                                      

·        Precutting insert knife (HM)                                                             

·        Pneumatic electrically controlled automatic hopper feed (max. sizes of square 100 x 100mm, min. 20 x 20mm.
With unloading device of finished pieces with automatic protection belt
 
Spare Parts: CENTAURO LATHES ROTORY SWITCH FITS ALL CENTAURO LATHES $475.00 BUY NOW



AG125 TOOL SHARPENER SHAPER & GRINDER CLICK HERE

AG125 "V" gouge sharpening system (optional)

No skills required for tool re-sharpening

  “V” Supports for workpiece

COPYLATHE CUTTERS Click Here

       Leasing & Financing Information & Links                   

            aFinance & Lease Available
Download LRI Rapidlease Application PDF File format

ne-w.gif - 1186 Bytes NOVELTY ITEMWOODWORKING SCREENSAVERS

centauro_grande.jpg - 5100 Bytes
  CONTACT US FOR MORE INFO
 help-botton-cc.bmp - 9718 Bytes

Brochures & Videos are now Available!
G&M Distributors 
 
Email Us Today!
Or call (802)476-8354
Email:
sales@copylathe.com
Website:
www.copylathe.com

www.copylathe.net