POWERMATIC-DT45 Dovetailer

FREE TRUCK Shipping to Any Commercial Address in the Lower 48 States, Residential, Tailgate or Redelivery Charges NOT INCLUDED!

If purchased by credit card you will recieve a refund on shipping within 24hrs of purchase.Commercial Address only. "

TThe POWERMATIC® DT45 manual dovetail machine is used to cut dovetails for drawers and various furniture components. The machine is equipped with a router spindle which allows cutting dovetails of adjustable height. The DT45 can machine four types of dovetails with different pitches. Locking and unlocking of pieces takes place manually by an eccentric clamp.Four centerlines - 1", 1-1/2", 2" and 2-1/2" - create a custom appearance
Manual eccentric clamping will keep boards firm
Eccentric spindle collet for resharpened cutters
Spring loaded carriage makes for smooth, effortless dovetail cutting
Cutter height of 3/16" to 3/4" accommodates different cutting depths and board thicknesses
Extra large soft grip handle provides positive control and comfort
The precision linear carriage bearings are sealed on both ends to eliminate dust buildup
Visual stylus and template aid in guiding the carriage
Material stops provide convenient positioning of the workpiece
Cast iron and steel construction for added stability and durability
1HP motor transfers plenty of power via the drive belt to the spindle
n.a.
Standard Equipment:
Four-sided template
Workstops
Tool kit
Dovetail bit
Dust chute with hose

Brand Powermatic
Center to Center Dovetail Spacing (in.) 1, 1-1/2, 2 and 2-1/2
Dust Collection Minimum CFM Required 500
Dust Port Diameter (OD/in.) front 2-1/2, rear 4
Height 61 inch
Length 33 inch
Maximum Dovetail Height (in.) 3/4
Maximum Front Thickness (in.) 1-3/4
Maximum Side Thickness (in.) 1-3/16
Maximum Work Piece Size (L x W/in.) 31 x 11
Minimum Dovetail Height (in.) 3/16
Minimum Front Thickness (in.) 9/32
Minimum Side Thickness (in.) 9/32
Minimum Work Piece Size (L x W/in.) 7-7/8 x 2-3/8
Model Number DT45
Motor HP 1HP
Motor Phase 1Ph
Motor Voltage 115/230V
Net Weight 424 pound
Number of Spindles 1
Overall Dimensions 33 x 33 x 61
Part Number 1791304
Prewired Prewired 115V
Ship Weight 447 pound
Spindle Speed (RPM) 18500
Table Height From Floor (in.) 35
Warranty 5 Year
Width 33 inch

WARRANTY AND SERVICE

Powermatci warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your POWERMATIC® tools. For the name of an Authorized Service Center in your area call your dealer.

Powermatic.