POWERMATIC-3520B Lathe, 2HP,

The Powermatic® 3520B is the third evolution of the time honored lathe with many new and improved features. The 3520B retained all the features of the prior models such as the sliding headstock, electronic variable speed with low and high speed ranges, and the spindle lock. The enhanced features include a digital RPM readout, built in spindle indexing on the head stock, and a re-designed tailstock with internal storage, chrome trimmed handwheels, and a laser etched quill which is self ejecting. The toolrest assembly also has improved locking on a new profile tool rest which can accommodate an optional dust hood assembly that travels with the toolrest. Additional features include a set of dead centers which hold a spindle for visual comparison, a two position mount for the optional bed extension, a sliding hammer knockout rod with brass tip, an attached tool caddy and a metal shelf for tool storage.

Sliding headstock with electronic variable speed and digital RPM readout for accurate speed adjustments
Spindle lock and built in spindle indexing on the headstock for drilling hole patterns, routing flutes, and other equally spaced features
Set of dead centers which hold a spindle for visual comparison
Re-designed toolrest geometry allows for better chisel movement along the toolrest
Laser etched quill is self ejecting.
Two position mount for the optional bed extension
Optional dust assembly that travels with the toolrest
Brass tipped knockout bar concentrates the action in the sliding handle; the brass tip will not damage drive centers
Attached tool caddy allows convenient access to centers, wrenches, etc.
Tailstock has internal storage for additional accessories
Chrome trimmed handwheels are ergonomic for a comfortable feel
Standard Equipment:
2HP TEFC Motor
Safety shield
3" face plate and face plate wrench
14" tool rest
Multiple ball-bearing live center
Brass tipped knockout rod
Drive center
Spindle lock
Amps 6.2
Brand Powermatic
Centerline of Spindle to Floor (in.) 44
Distance Between Centers (in.) 34-1/2
Headstock Taper MT-2
Height 58 inch
Hole Through Spindle (in.) 9/16
Length 75 inch
Model Number 3520B
Motor HP 2HP
Motor Phase 1Ph (or 3Ph)
Motor Voltage 220V
Net Weight 630 pound
Overall Dimensions 75 x 27 x 58
Part Number 1352001
Prewired n.a.
Ram Travel (in.) 4-1/2
Ship Weight 682 pound
Spindle Nose (in. x TPI) 1-1/4 x 8
Spindle Speeds high 125-3200, low 50-1200
Spindle Taper MT-2
Swing over Bed (in.) 20
Swing Over Tool Rest Base (in.) 16
Tailstock Taper MT-2
Warranty 5 Year
Width 27 inch