Distributors Of Specialty wood lathe : CNC Automatic & Semi-Auto Wood copy Lathes & Tooling.

KING

hapfosm.jpg - 11442 Bytes

hapfo ap-5000-Hydro King

The Hapfo ap-5000-Hydro King expands the capabilities of the hapfo ap-5000-Hydro by giving the woodturner the ability to turn and rope items up to 96" such as bed posts and columns. The King's innovative hydraulic tracing device has a six inch range that allows the woodturner to produce exquisite profile pitches and it is capable of copying from a sample as well as a template. The KFE Twist Attachment, can be fitted on the ap-5000-Hydro King to create endless turning possibilities such as longitudinal groovings, rope twists, barley twists, spirals, and hollow core turnings.

hapfo – Hydraulic Wood Copying Lathe ap-5 0 0 0-Hydro King Motor 220 volts, 3-phase, 60 cycles
Distance between centres 1.600 mm, copying length 1.500 mm Hydraulic tracing device (stroke 150 mm) Motorized feed by means of infinitely variable electronic direct-current motor (0,37 kW) incl. quick return of carriage, tailstock MK 2 incl. 1 HSS - steel, however without follower rests
Extra charge for distance between centres 2.500 mm, copying length 2.400 mm, inclusive second lathe bed with third column as well as second tool panel, incl. template bar holder on 2nd bed with throughway template bar as well as two cranks for fine adjustment and two additional supporting legs to the bed, incl. gear rack and aluminium strip on 2nd bed, incl. heavy tailstock MK 3. A max. work piece Ų of 170 mm is possible when using the whole distance between centres of 2.500 mm. (Total length of machine about 3.600 mm. Machine will be supplied in one whole piece as it cannot be dismantled)	•
Extra charge for spindle drive infinitely electronically variable From 0-3500 rpm, motor: 220 volts, (3 phase) – 2 HP (1,5 kW) – 60 cycles	•
Extra charge for special setup for grooving (KF-50) incl. feed motor (0,75 kW) with separate ventilation incl. KFE, however without ELU-router, without bracket, incl. 16 mm collet. Grooving length 2.400 mm	•
Profile cutter knive No. 1 for KF-50
Profile cutter knive No. 2 for KF-50
Profile cutter knive No. 3 for KF-50
Profile cutter knive No. 4 for KF-50
Profile cutter knive No. 5 for KF-50
Profile cutter knive No. 6 for KF-50
Profile cutter knive No. 7 for KF-50
Special-live centre MK 2 with pressure ring
Special-live centre MK 3 with pressure ring
Extra charge for precision setting of depth	•
Extra charge for left- and right run incl. slip-off safety device	•
Slip-off safety slot per accessory part on/in spindle) required for left- and right run
Four-jaw chuck follower rest 30 - 60 mm infinitely variable	•
Four-jaw chuck follower rest 50 - 80 mm infinitely variable	•
Four-jaw chuck follower rest 60 - 100 mm infinitely variable (max 1250 rpm)	•
Four-jaw chuck follower rest 100 - 135 mm infinitely variable (max 1000rpm)	•
Ring-follower rest 15-70 mm with HSS-steel for rough cutting (without inset discs)	•
1 Set inset discs for ring follower rest Ų 20 / 30 / 40 / 50 / 60 / 70 mm
1 Set inset discs for ring follower rest Ų 15 / 25 / 35 / 45 / 55 / 65 mm
Work piece feeding device (mounted on ring-follower rest)
Ring-follower rest 80 - 120 mm with HSS-steel for rough cutting (without inset discs)	•
1 Set inset discs for ring follower rest Ų 80 / 85 / 90 / 95 / 100 mm
Six-pronged dog MK 3, Ų 20 mm lengthened
Six-pronged dog MK 3, Ų 30 mm lengthened
Six-pronged dog MK 3, Ų 40 mm lengthened
Hand rest for subsequent cutting by hand (on support) for Hydro
Copying lathe tool HSS
Super-copying lathe tool for soft and hard wood (lifex 10)
Hand rest base with hand rest 275 mm (for turning by hand)
Hand rest 180 mm
Hand rest 425 mm
Template made of aluminium 60 x 1000 mm
Template made of aluminium 80 x 1000 mm
Template made of aluminium 100 x 1000 mm
Template made of aluminium 60 x 1500 mm
Template made of aluminium 80 x 1500 mm
Template made of aluminium 100 x 1500 mm
Centering device
Socket chuck Ų 40 / 50 / 60 mm each
Socket chuck Ų 70 / 80 mm each
Screw chuck Ų 90 mm
Face plate Ų 150 mm
Gear rim drill chuck MK 2
Three-jaw chuck Ų 125 mm
Four-jaw chuck Ų 125 mm
Compound slide rest ( NEW - also suited for pattern shops)
Cross-copying device complete, incl. safety and suction hood
Special-lathe tool incl. steel holder and profile sharpening machine with diamond grinding stone (motor 220 volts, 60 cycles)
Special-Lathe tool (V-steel)
Tantum-Lathe tool (V-steel)
Sharpening machine for copying lathe tools, (motor 220 volts, 60 cycles)
Replacement grinding stone for sharpening machine
Connection unit for suction tube for ring-follower rest 15 - 70 mm
Connection unit for suction tube for ring-follower rest 80 - 120 mm

This unique machine combines four different operations:

Additional Options:

16.

Live center MK-3

17.

Pressure ring for live center MK-3

Time of Delivery:

     To be determined at time of order

  Terms

     100% in US dollars

Information Request Form

Select the items that apply, and then let us know how to contact you.

Send product literature
Send Machine Quote
Have a salesperson contact me

"Quotation on What Machine Model? "
"Your name"
"Your Title"
"Your Company"
"Your Address"
"Your Meassage to us"
"Your email address "
"Your FAX"
"Your Phone"
To have your form sent & have a confirmation on your request, please enter the characters you see in the image:
	Why?
If you cannot read the image, click for a new one