centauro t4f/ woodcopy lathe

FC 1600

Copy Lathe with Milling head
T4F-milling-large.jpg - 65152 Bytes
G&M DISTRIBUTORS is proud to introduce the newest lathe to the Centauro line. The Centauro T4/F copy lathe is equipped with an integrated milling head able to produce fluted and spiral twist pieces. The T4/F frame construction is based upon the original quality of the T4 copy lathe. The new integrated milling head can be activated by a switch after turning as been completed

MAIN FEATURES:

· Press button manual electric controls

· Hydraulic copying unit with highly sensitive tracer working on both wooden samples or templates,for copying.

· High Precision Ball Screw Advance for Accurate Saddle Feed Speed Programming.

· Capable of two working passes, roughing first and then finishing

· Semi-automatic mechanical workpiece centering device

· Electric spindle brake

· Turning with a single cobalt gouge, radius 1.2 mm

· Spindle reversing to change from copying to manual working and vice versa or for manual sanding.

· Milling cutter head with driving centre ø 30mm and ball bearing tailstock centre.

STANDARD EQUIPMENT :
Max Distance between centers/63''(1600mm)

·

Saddle advance with Trapezoidal screw

Revolving steady D. 90 mm for sq. 65 x 65 mm

Precutting insert knife

driving center for turning

Antivibration device for milling

8 gearwheels for pitches (providing max 10 pitches)

Hydraulic copying unit with cobalt R 1.25 mm

Reducing bush for revolving steady D. 90 mm

Revolving tailstock center D. 12 mm

Horizontal milling unit ( cutter D. 40 mm )

Indexer unit ( 2-24 ) with driving center

Tool support rest for hand turning

Dimensions :

Maximum length: 3200mm

Maximum height: 1450mm (To top of control panel)

Maximum Depth: 1100mm

Bed height: 860mm

TECHNICAL SPECIFICATIONS:

Maximum distance between centers

63"(1600mm)

Height of centers over bed

9.84"

Maximum milling diameter

7.87” (200mm)

Minimum milling diameter

0.27” ( 7mm)

Swing over bed (manual turning)

19.68" (square 13.7”x13.7")

Swing over bed with copy unit

5.9" (square 4"x 4”)

Swing permitted by revolving steady

3.5”

Swing permitted by fixed steady

3.9”

Connection for driving & tailstock center

c-3

Saddle feed speed

0 to 19.8 ft/min

Saddle return speed

24 ft/min

Spindle speed RPM

600-900-1100-1300-1500-1800-2200-3000

No. 10 pitches

0.59” – 12.6”

Indexing

2 to 24

2 speed milling motor

0,6 – 1 HP

Milling speed RPM

6500 – 13000

Spindle motor power

4 HP

Motor power of hydraulic unit

1 HP

Installed power

5 HP

Operating pressure

362 psi

Stroke of copy unit

3.14”

Finishing pass max depth

1”

Call or Email for a Quote.The Centauro Model T4 Is the same machine only with out milling head view DVD Click here

Maximum distance between centers	63"(1600mm)
Height of centers over bed	9.84"
Maximum milling diameter	7.87” (200mm)
Minimum milling diameter	0.27” ( 7mm)
Swing over bed (manual turning)	19.68" (square 13.7”x13.7")
Swing over bed with copy unit	5.9" (square 4"x 4”)
Swing permitted by revolving steady	3.5”
Swing permitted by fixed steady	3.9”
Connection for driving & tailstock center	c-3
Saddle feed speed	0 to 19.8 ft/min

Saddle return speed	24 ft/min
Spindle speed RPM	600-900-1100-1300-1500-1800-2200-3000
No. 10 pitches	0.59” – 12.6”
Indexing	2 to 24
2 speed milling motor	0,6 – 1 HP
Milling speed RPM	6500 – 13000
Spindle motor power	4 HP
Motor power of hydraulic unit	1 HP
Installed power	5 HP
Operating pressure	362 psi
Stroke of copy unit	3.14”
Finishing pass max depth	1”